Обзор статистики зарплат профессии "Инженер по технике безопасности в Азербайджане"

Duties & Responsibilities:Include, but are not limited to the following:Performs planned and corrective maintenance on gas turbine driven compressor and generator packages.Performs planned and corrective maintenance of field instrumentation, F&G system, control systems, electrical systems and so on.Performs I&C systems troubleshooting activities as necessary to determine failure conditions and rectifies any defects found.Performs routine data collection and record field measurements.Performs instrumentation and control systems equipment calibration.Provide front line support to installation and commissioning activities.Conducts condition monitoring of equipment.Supports control system retrofit and upgrade scopes.Performs routine backups of all controls systems software and maintain back up files with up to date revisions.Participates in continuous improvement initiatives in assigned area of responsibility.Identifies and orders necessary I&C related spares for maintenance and repair activities in time.Provides engineering input for updating inventory lists with high quality and up to date data.Identifies required consumables for job execution and order them in time to make sure stock availability.Communicates with customer regarding condition of equipment and repair work scope.Timely produce and distribute detailed and high quality service, inspection, troubleshooting and fault analysis reports.Ensures recommendations from applicable Service Bulletins are reviewed and implemented in timely manner.Recognizes problems and is proactive in helping to resolve them.Participates in risk assessment for maintenance activities and contribute to Permit to Work system.Ensures proper use of CMMS system to report, track and record all maintenance activities with high quality of data.Ensures all completed tasks are properly completed in CMMS system and follow up WOs are raised when needed.Ensures all company owned hand, measurement and diagnostic tools are properly maintained and calibrated in time.Develops a good working relationship with the customer.Coaches and mentors junior Field Service Engineers.Ensure compliance with all company and governmental safety, environmental and health rules and regulations.Education/Experience and Qualification:Minimum BSc degree in Instrument and Control Engineering or equivalent.Minimum 2 years of experience in maintenance, operations, troubleshooting and repair of I&C systems.Exposure to PLC control systems (Allen Bradley, Siemens).Proven field service experience.Excellent communication and interpersonal skills.Familiarity and experience with hand, measurement and testing tools.An understanding of engineering drawings and principles.The ability to work with minimum supervision and under pressure.Excellent problem-solving skills.English literacy.Good technical writing skills.Good knowledge of MS Office.Experience in a similar industry is strongly preferred.Interested candidates are requested to submit their CVs by indicating the position title “I&C Field Service Engineer” in the subject line of your email. Please note that only shortlisted candidates will be contacted.

About The RolePD&MS Group have an exciting opportunity for a Senior Cost Engineer to join our progressive Commercial team based in Baku on a full time, long term basis. Reporting to the Commercial Manager you will be responsible for the effective management, control and reporting of project costs for larger projects in a consistent manner and in accordance with all relevant Company policies and procedures.Please note only Azeri nationals can be considered for this position.Key duties: Management and provision of guidance and assistance to Cost EngineersWork proactively with relevant PRP to ensure that commitments and costs are tracked and controlledProvide Cost Engineering service to the contract with responsibility for the accurate Cost Reporting of complete projects or individual elements within major projectsWork proactively and meet with client representativesGenerate and maintain accurate cost reports in a format and frequency that provides clear visibility of the status of expenditure against budgets for internal useProduce regular cost reports for clients as required by the Contract Agreement or Company requirements detailing CTR and CVO values, client approved PO values, billed to date, committed costs, forecast final costs, as a minimum for external reportingIdentify variances in project budget and in conjunction with PRP expediently implement corrective actionsRegularly monitor man-hour expenditure versus budget and physical progress, ensuring potential over-runs are identified and actioned in a timely mannerIn conjunction with the PRP, responsible for the management and expedient recovery of Work in Progress costsMaximise sales invoicing on an on-going basis through awareness of project status and billing milestonesActively participate in project kick -off and progress meetingsReview and commercially approve CTRs / CVOs and terms and conditionsReview and approve client Purchase Orders / PD&MS Contract Review sheets in accordance with contract requirementsEvaluate outgoing RFQ’s, carry out bid evaluations and provide recommendation for subsequent Purchase Orders in conjunction with the PRP, for 3rd party servicesIn conjunction with the PRP review and approve all Purchase invoices ensuring compliance with budgetLiaise directly with Finance to ensure sales invoices are prepared and issued in a timely manner and resolve invoicing queriesProactive in the provision of improvement proposals to streamline the invoicing / cost reporting processEstablish and maintain close working relationships with Finance, Procurement, Planning and Commercial TeamsProactively identify and highlight areas of concern or commercial risks to Commercial ManagerResponsible for ensuring professional development is maintained and identified competency requirements are undertaken in a timely mannerAdherence to the Company Integrated Management SystemCompliance with Quality Assurance, Health and Safety and Environmental PoliciesDemonstrate and promote PD&MS QHSE principles and lead by example. Ensure unsafe activities are challengedAdherence to the requirements of best practice standards recommendations and processes in the undertaking of duties. In particular, risk assessment and control, reliability and failure prevention necessary to ensure the safe use of systemsDemonstrate and promote PD&MS values and lead by exampleEnsure direct report performance reviews are carried out within the required timescalesAbout YouThis position would be well suited to an individual with existing cost engineering experience with specific experience in reviewing and interpreting plans and schedules. Strong written and spoken English also required.

PDL are currently looking for candidates for the following positions. This opportunity is open to Azerbaijani Nationals only with relevent site experience in Energy or Petorchemical Modification, TAR, or Upgrade projects.Job Requirements:BSC or Master Degree in relevant discipline5 years + design, Pre-FEED, FEED engineering or project engineering experience in Energy or Petrochemical or Refinary projects.On site experience as project engineer, construction engineer, or field service engineer also considered.Arcihtectural EngineerMechanical EngineerCivil EngineerProcess DesignerProcess Safety EngineerMechanical DesignerInstrument and Control DesignerFire Fighting System DesignerTelecom System Design EngineerSenior Architectural EngineerDraftsmanPlease send your current CV'S in word format to e-mail.

Department: Engineering & MaintenanceLocation: SumgaitJob summary:This position is expected to deliver specialist technical support and assurance for electrical hardware and software systems, work across the entire field of electrical engineering and ensure safe, reliable operation and remove or mitigate risk within their area of responsibility.The Individual is expected to have experience in electrical power generation, transmission, distribution, utilisation and operation at oil and gas processing facilities and be knowledgeable of applicable industry, country, and company standards and practices..Job duties:Provide troubleshooting and operational support for high voltage (HV) and low voltage (LV) electrical systems packages and all other SP electrical equipment.Perform electrical hazard and reliability analysisPerform power system analysis and protection coordination using specialist softwarePerform electrical system troubleshooting and root cause failure analysisContribution to SP internal electrical Engineering Technical Practices (ETPs).Provide technical guidance on application of codes, standards, project design criteria and ETPs.Participate in the Electrical Community of Practice (CoP) and the wider Instrument, Control and Electrical (ICE) Network.Review and approve maintenance, operation, and switching procedures as requestedPerform roles as required in the local SP electrical authorisation scheme as defined in the applicable HSE procedureApprove MOCs as required Provide technical support to the site maintenance functions, including in spares selection as requestedParticipate in the condition monitoring programs for electrical equipment as defined in the maintenance strategiesOther duties requested by Line ManagerParamount the safety, health, and welfare of the staff.Perform services only in areas of their competence.Act for each employer faithfullyAvoid deceptive acts.Conduct themselves honourably, responsibly, ethically, and lawfully to enhance the honor, reputation, and usefulness of the profession.Requirements:Experience:Minimum 3-5 years significant experience with electrical systems, i.e:Proficient in preparing work scopes, MOC (manage of chances) and budgets, and ensure that scopes and budgets are metBachelor’s degree in Power Electrical Engineering Chartered Engineer or Registered Professional Engineer.Language skills:Advanced knowledge of Azeri and EnglishGood knowledge of Russian is preferableTechnical skills:Electrical power generation, transmission and distribution.Protection systemsLarge electric drive systems.Electrical system analysis tools.The candidate should have a working knowledge of industry and government standards such as EEMUA Electrical Committee, EI and/or IEEE and API.Knowledge of Electrical Safety Practices (NFPA 70E and/or IEC safety regulations).Project and/or operations experience as an electrical engineer.Equipment skills:HD4 Gas insulated MV circuit breakersOil/Dry transformerMCC switchboardVFD/SS Diesel generatorHeat tracing systemCathodic Protection systemEarthing/lightning systemApplication procedure:Interested candidates should follow the link below.The above vacancy is addressed to nationals of Azerbaijan or with permanent residency in Azerbaijan. All eligible applications for the advertised post will be assessed and given equal opportunities.Application closing date: September 06, 2023

Department: Engineering & MaintenanceLocation: SumgaitJob summary:Candidate should hold good technical knowledge about equipment performance and failures, asset management, budget control and risk management. Additionally, a good work ethic and strong interpersonal skills are required since the position involves daily contact with customers and end users.Job duties:Report to the Discipline Engineers Team Lead and work under his overall supervision and directions.SAP PM Key user- responsible for work management business process and new enhancements, custodian of the existing CMMS functionality, to ensure that all functions and processes are working in a good manner.Develop the short, medium- and long-term maintenance plans and schedules with the coordination of business lines and ensure implementation of them;Review PMR (Planned Maintenance Routine) content for correctness to ensure activity optimized and reliability and performance of equipment is improved;SPA for Maintenance Assessment, perform gap assessment and development plan to complete identified gaps, track progress;Contribute to development and improvement of maintenance performance measures;Responsible for maintaining equipment history dataIncorporates close-out and lessons learned from breakdown maintenance into preventive maintenance routines and corrective maintenance where required;Reviews, improves and approves maintenance strategy plans for contractors and vendors;Supervising engineering and technical staffManaging budgetsMaintaining statistical recordsEnsuring compliance with health and safety legislationCreating maintenance proceduresDesign maintenance strategies, procedures and methodsDiagnose breakdown problemsLiaise with client departments, customers and other engineering and production colleaguesMonitor and control maintenance costsImprove health and safety policies and proceduresEnsure there is continuous cover of the machinery and equipment in case of breakdowns.Accountable for delivery of technical decisions and solutionsEngineer should hold paramount the safety, health, and welfare of the staff.Perform services only in areas of their competence.Act for each employer faithfullyAvoid deceptive acts.Conduct themselves honorably, responsibly, ethically, and lawfully to enhance the honor, reputation, and usefulness of the professionRequirements:Experience:Minimum 5-7 years’ experience in maintenance/engineeringSolid understanding of industrial equipment and their partsStrong knowledge of maintenance programs and their integration into SAP PM;Good knowledge about practical application of Corrective, Predictive and Preventive maintenance strategiesKnowledge and experience about the usage of tools and techniques used in repair, inspection, and overhaul.Language Skills:Advanced knowledge of English and AzerbaijaniGood knowledge of Russian is an assetTechnical Skills:Relevant technical knowledge (mechanical; instrument; electrical equipment)Understanding safety precautions involved while working high powerful electrical equipmentSolid understanding of control and monitoring devicesEducation and experience:Bachelor’s degree in a relevant subject, such as:Electrical and electronic engineeringManufacturing engineeringMechanical engineeringProduction engineering.Application procedure:Interested candidates should follow the link below.The above vacancy is addressed to nationals of Azerbaijan or with permanent residency in Azerbaijan. All eligible applications for the advertised post will be assessed and given equal opportunities.Application closing date: September 16, 2023

What are the expected from the candidate:Performing routine maintenance on A/C and refrigeration systems to keep them in optimal working condition. This includes cleaning, lubricating, and inspecting various components;Identifying and diagnosing issues with A/C and refrigeration systems; Fixing any malfunctions or breakdowns in A/C and refrigeration systems;Properly handling, charging, and recovering refrigerants according to industry regulations and safety standards;Installing new A/C and refrigeration systems or components, ensuring that they are correctly set up and functioning as intended;Creating and implementing maintenance schedules to prevent potential issues and extend the lifespan of the systems; Adhering to safety protocols and regulations while working with electrical systems, refrigerants, and potentially hazardous components;Designing, constructing, and maintaining heating, ventilation, and air conditioning systems for residential and commercial buildings;Analyzing building plans to determine the number of HVAC units required for each room or floor of a building;Evaluating customer needs and recommending appropriate solutions;Determining the best location for installing HVAC equipment in a building;Coordinating with contractors to ensure that new installations meet building codes and are completed on time;Working with contractors to ensure that existing HVAC systems are operating properly;Inspecting equipment such as chillers, boilers, air handling units, and refrigeration equipment.What qualifications the candidate need to possess:University degree in technical or related field;Minimum 5 years practical experience in HVAC/refrigeration trade or related field; Knowledge in HVAC, plumbing, using hand tools, electrical, refrigerator, air conditioning and heating, and appliances;Knowledge of equipment (Chiller, AHU, Cooling tower, Pumps);Proficient in MS Office Programs (Word, Excel, PowerPoint);Excellent cognitive skills with a proactive approach to problem solving;Ability to manage multiple priorities with minimal supervision;Self-driven, highly motivated, initiative.Azerbaijani, English and Russian languages are required.What successful candidate gets:Competitive base salary;Opportunity to work in an international and diverse team;Becomes a part of Pasha Group;Membership of DəyərliSən Pasha Loyalty ProgramMedical insurance;Remarkable Saffron discounts in more than 20 best restaurants.Please note that position is open for candidates possessing Azerbaijani citizenship only. Only shortlisted candidates will be invited to the further stages of the recruitment process.Interested candidates are kindly requested to send their CV/resumes by indicating “HVAC Engineer” in the subject line.Deadline for applications – September 10, 2023.